Even as Federal Reserve policymakers seemed unsure of the immediate direction of the global economy, debating whether disinflation could be an issue in the short term at their meeting March 18-19, most of them expected inflation would return to 2 percent in the next few years, according to minutes of the gathering released April 9.
But just when within the next two years inflation would start rising has been a point of debate, and the fact that producer prices exceeded economist expectations this week reinforced the idea that policymakers, for all their good intentions, may not time interest rates correctly to contain runaway inflation, as historically has been the case.
And this situation also clearly calls for the need to have investments that can simultaneously enhance earnings and protect against inflation, which can appear more suddenly than policymakers have forecasted. Energy infrastructure or midstream Master Limited Partnerships (MLPs) can deliver this investment flexibility, offering investors exposure to the shale boom or commodity price rises, tax benefits, and most MLPs’ contracts are protected against the producer price increases we saw this month.
The prices businesses receive for their goods and services rose in March, defying a long stretch of subdued inflation across the U.S. economy, according to the Wall Street Journal. The producer price index for final demand, which measures changes in prices for everything from food and machinery to warehousing and transportation services, rose a seasonally adjusted 0.5% from February, the Labor Department reported on April 11. The index rose 0.6%, excluding the volatile categories of food and energy.
Economists surveyed by the Wall Street Journal had expected the index to rise a more modest 0.1%, and predicted a 0.2% increase excluding food and energy. The index fell 0.1% in February, unchanged from the Labor Department’s initial estimate. The PPI for final demand was up 1.4% in March from a year earlier! , the biggest year-over-year increase since last August.
The PPI measures the prices businesses receive from buyers such as governments, consumers and other businesses. The Labor Department overhauled the report this year to measure a much broader swath of the U.S. economy.
Mueller Industries, Inc., incorporated on October 03, 1990, is a manufacturer of copper, brass, plastic, and aluminum products. The Company�� products include copper tube and fittings; brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; plastic pipe, fittings and valves; refrigeration valves and fittings; fabricated tubular products; and steel nipples. The Company also resells imported brass and plastic plumbing valves, malleable iron fittings, faucets and plumbing specialty products. Mueller�� operations are located throughout the United States and in Canada, Mexico, Great Britain, and China. The Company has two segments: the Plumbing & Refrigeration segment and the Original Equipment Manufacturers (OEM) segment. The Plumbing & Refrigeration segment is composed of the Standard Products Division (SPD), European Operations, and Mexican Operations. The OEM segment is composed of the Industrial Products Division (IPD), Engineered Products Division (EPD), and Jiangsu Mueller-Xingrong Copper Industries Limited (Mueller-Xingrong), the Company�� Chinese joint venture. On August 16, 2012, the Company acquired 100% of the stock of Westermeyer Industries, Inc. (Westermeyer), located in Bluffs, Illinois. Westermeyer designs, manufactures, and distributes high-pressure components and accessories for the air-conditioning and refrigeration markets. In October 2013, Commercial Metals Company completed the sale of Howell Metal Company, to Mueller Copper Tube Products, Inc., a subsidiary of Mueller Industries, Inc.
Plumbing & Refrigeration segment
SPD manufactures and sells copper tube, copper and plastic fittings, plastic pipe, and valves in North America and sources products for import distribution in North America. European Operations manufacture copper tube in Europe, which is sold in Europe and the Middle East; activities also include import distribution in the United Kingdom and Ireland. Mexican Operations consist of pi! pe nipple manufacturing and import distribution businesses, including product lines of malleable iron fittings and other plumbing specialties. The Plumbing & Refrigeration segment sells products to wholesalers in the heating, ventilation, and air-conditioning (HVAC), plumbing, and refrigeration markets, to distributors to the manufactured housing and recreational vehicle industries, and to building material retailers.
Mueller�� Plumbing & Refrigeration segment includes SPD, which manufactures a line of copper tube, in sizes ranging from 1/8 inch to eight inch diameter, which are sold in various straight lengths and coils. Mueller is in the air-conditioning and refrigeration service tube markets. In addition, Mueller supplies a variety of water tube in straight lengths and coils used for plumbing applications in virtually every type of construction project. SPD also manufactures copper and plastic fittings and related components for the plumbing and heating industry that are used in water distribution systems, heating systems, air-conditioning, and refrigeration applications, and drainage, waste, and vent systems. SPD�� products are used in the domestic residential and commercial construction markets. The Plumbing & Refrigeration segment also fabricates steel pipe nipples and resells imported brass and plastic plumbing valves, malleable iron fittings, faucets, and plumbing specialty products to plumbing wholesalers, distributors to the manufactured housing and recreational vehicle industries and building materials retailers.
The Company competes with Cerro Flow Products, Inc., Cambridge-Lee Industries LLC , Wolverine Tube, Inc., KobeWieland Copper Products LLC, Howell Metal Company, Elkhart Products Company, NIBCO, Inc. and Charlotte Pipe & Foundry.
OEM segment
The OEM segment manufactures and sells brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; refrigeration valves and fittings; fabr! icated tu! bular products, and gas valves and assemblies. Mueller-Xingrong manufactures engineered copper tube primarily for air-conditioning applications. The products are sold primarily to OEMs located in China. The OEM segment sells its products primarily to original equipment manufacturers, many of which are in the HVAC, plumbing, and refrigeration markets.
Mueller�� OEM segment includes IPD, which manufactures brass rod, nonferrous forgings, and impact extrusions that are sold primarily to OEMs in the plumbing, refrigeration, fluid power, and automotive industries, as well as to other manufacturers and distributors. The Company extrudes brass, bronze and copper alloy rod in sizes ranging from 3/8 inches to four inches in diameter. These alloys are used in applications that require a high degree of machinability, wear and corrosion resistance, as well as electrical conductivity. IPD also manufactures brass and aluminum forgings, which are used in a variety of products, including automotive components, brass fittings, industrial machinery, valve bodies, gear blanks, and computer hardware. IPD also serves the automotive, military ordnance, aerospace, and general manufacturing industries with cold-formed aluminum and copper impact extrusions. The OEM segment also includes EPD, which manufactures and fabricates valves and custom OEM products for refrigeration and air-conditioning, gas appliance, and barbecue grill applications. In addition, EPD manufactures shaped and formed tube, produced to tight tolerances, for baseboard heating, appliances, and medical instruments.
The Company competes with Chase Brass and Copper Company.
Advisors' Opinion: - [By Neil Macneale]
Among the potential addition to our portfolio, Mueller Industries (MLI) may seem among the least likely. It�� a very small-cap company ($1.8B) and it�� not very well known (covered by only two analysts).
- [By Ben Levisohn]
The iShares Russell 2000 ETF (IWM) has dropped 5.2% so far this year, while Mueller Industries (MLI), which has plunged 55%, Medidata Solutions (MDSO), which has plummeted 44%, Financial Engines (FNGN), which has slid 42%, and Isis Pharmaceuticals (ISIS), which has tumbled 42%, are the index’s biggest losers.
- [By Seth Jayson]
Mueller Industries (NYSE: MLI ) reported earnings on July 23. Here are the numbers you need to know.
The 10-second takeaway
For the quarter ended June 29 (Q2), Mueller Industries met expectations on revenues and beat expectations on earnings per share.
Top 10 Machinery Stocks To Watch For 2014: Titan Machinery Inc (TITN)
Titan Machinery Inc., incorporated in 1980, owns and operates a network of agricultural and construction equipment stores in the United States and Europe. The Company is a retail dealer of Case IH Agriculture equipment and a retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the United States. It operates in two segments: Agriculture and Construction. The agricultural equipment, which it sells and services includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment it sells and services includes heavy construction and light industrial machinery for commercial and residential construction, road and highway construction and mining. On February 28, 2011, it acquired certain assets of Tri-State Implement, Inc. On March 31, 2011, the Company acquired interest in Schoffman's Inc. In July 2012, the Company acquired Curly Olney��, Inc. and opened two Case IH dealerships in Cluj and Roman, Romania. In November 2012, the Company acquired Falcon Power Inc. In December 2012, the Company acquired VAIT D.o.o. In February 2013, it acquired Tucson Tractor Company. In March 2013, it acquired Adobe CE, LLC, consisting of one Case Construction equipment dealership located in Albuquerque, New Mexico.
On April 1, 2011, the Company acquired certain assets of ABC Rental & Equipment Sales. On May 13, 2011, the Company acquired certain assets of Carlson Tractor & Equipment, Inc. On May 31, 2011, the Company acquired certain assets of St. Joseph Equipment Inc. On September 2, 2011, the Company acquired certain assets of Virgl Implement Inc. On September 2, 2011, the Company acquired certain assets of Victors Inc. On November 1, 2011, the Company acquired certain assets of Van Der Werff Implement, Inc. On December 1, 2011, the Company acquired certain assets of Jewell Implement Company, Inc. On December 23, 2011, the Company, through a newly formed subsidiary, Titan Machinery Romania, S.R.L., ac! quired certain assets of AgroExpert Capital S.R.L. On February 27, 2012, the Company acquired certain assets of the Colorado division of Adobe Truck & Equipment, LLC. On March 5, 2012, the Company acquired certain assets of Rimex 1-Holding EAD. On March 30, 2012, the Company acquired certain assets of Haberer's Implement, Inc. On April 2, 2012, the Company acquired certain assets of East Helena Rental, LLC.
Equipment Sales
The Company sells agricultural and construction equipment manufactured under the CNH family of brands, as well as equipment from a variety of other manufacturers. The used equipment it sells is from inventory acquired through trade-ins from its customers and selective purchases. The agricultural equipment, which it sells and services includes application equipment and sprayers, combines and attachments, hay and forage equipment, planting and seeding equipment, precision farming technology, tillage equipment and tractors. The construction equipment, which the Company sells and services includes articulated trucks, compact track loaders, compaction equipment, cranes, crawler dozers, excavators, forklifts, loader/backhoes, loader/tool carriers, motor graders, skid steer loaders, telehandlers and wheel loaders. The Company also sells used equipment through its outlet stores.
Parts Sales
The Company sells a range of maintenance and replacement parts on equipment that it sells, as well as other types of equipment. It maintains an in-house parts inventory to provide parts, and repair and maintenance support to its customers.
Repair and Maintenance Services
The Company provides repair and maintenance services, including warranty repairs, for its customers equipment. In addition, the Company provides customer service by maintaining service histories for each piece of equipment owned by its customers, maintaining around-the-clock service hours, providing on-site repair services, scheduling off-season maintenance acti! vities wi! th customers, notifying customers of periodic service requirements and providing training programs to customers.
Equipment Rental and Other Business Activities
The Company rents equipment to its customers on a short-term basis for periods ranging from a few days to a few months. In addition, the Company provides ancillary equipment support activities, such as equipment transportation, global positioning system (GPS) signal subscriptions in connection with precision farming and reselling CNH Capital finance and insurance products.
The Company competes with RDO Equipment Co., Butler Machinery, Ziegler Inc. and Brandt Holdings Co.
Advisors' Opinion: - [By Seth Jayson]
Titan Machinery (Nasdaq: TITN ) reported earnings on June 6. Here are the numbers you need to know.
The 10-second takeaway
For the quarter ended April 30 (Q1), Titan Machinery met expectations on revenues and met expectations on earnings per share.
- [By Rick Munarriz]
1. Titan Machinery will close lower on the week
Titan Machinery (NASDAQ: TITN ) is in a slump. Analysts have been slashing their projections for the specialty retailer of agricultural and construction equipment. One would think that construction would be on the rise given the housing boom. An improving economy should benefit farmers. However, Titan Machinery isn't cashing in on the trends.
Top 10 Machinery Stocks To Watch For 2014: Graco Inc (GGG)
Graco Inc. (Graco), incorporated in 1926, design, manufacture and sell equipment that pumps, meters, mixes, dispenses and sprays a variety of fluids and semi-solids. The Company operates in three segments: Industrial, Contractor and Lubrication. Primary users of its equipment include contractors and original equipment manufacturers, who uses its equipment in a variety of applications in the construction, manufacturing, processing and maintenance industries. Its equipment is used to paint, finish, fill, glue and seal a wide range of goods and materials. Graco sells its equipment through third-party distributors worldwide. The Company sells its products in geographic markets, such as the Americas (North and South America), Europe (including the Middle East and Africa) and Asia Pacific. In January 2014, the Company announced that it has completed the acquisition of QED Environmental Systems and EcoQuip.
Industrial Segment
The segment includes the Industrial Products and the Applied Fluid Technologies divisions. End users of its industrial equipment require solutions to their manufacturing and maintenance challenges and are driven to purchase its industrial equipment by the return on investment that its products provide. The Industrial Products division markets its equipment and services to customers who manufacture, assemble, maintain, repair and refinish products, such as appliances, vehicles, airplanes, electronics, cabinets and furniture, and other articles. In addition to marketing its equipment to customers in similar industries, the Applied Fluid Technology division also sells to contractors who use its plural component equipment to apply foam insulation and protective coatings to buildings and other structures. Most Industrial segment equipment is sold worldwide through general and specialized third-party distributors, integrators, design centers, original equipment manufacturers and material suppliers.
The Industrial Products division focuses its product de! velopment and sales on two main applications: equipment that applies paint and other coatings to products, such as motor vehicles, appliances, furniture and other industrial and consumer products (finishing), and process pump equipment that moves and dispenses chemicals and liquid and semi-solid foods (process pumps). It�� finishing equipment pumps, meters and applies liquids on all types of wood, metal and plastic. Manufacturers in the automotive, automotive feeder, truck/bus/recreational vehicle, military and utility vehicle, aerospace, farm and construction, wood and general metals industries use its liquid finishing products. Its liquid finishing equipment includes paint circulating and paint supply pumps, paint circulating advanced control systems, plural component coating proportioners, various accessories to filter, transport, agitate and regulate fluid, and spare parts, such as spray tips, seals and filter screens.
The Company�� process pumps move chemicals, petroleum, food and other fluids. Manufacturers and processors in the food and beverage, dairy, pharmaceutical, cosmetic, oil and gas, electronics, wastewater, mining and ceramics industries use its process pumps. It offers pumps for sanitary applications, including Food and Drug Administration (FDA )-compliant 3-A sanitary pumps, diaphragm pumps, transfer pumps and drum and bin unloaders. Its process pumps provide a mechanized solution to a manual process in a factory of moving fluids from large barrels into equipment that dispenses the fluid into jars or other containers. During the year ended December 31, 2011, the Company purchased certain peristaltic pumps assets of Eccentric Pumps, LLC, provided the Company with an entry into the industrial peristaltic pump industry.
The Applied Fluid Technologies division directs its engineering, sales and marketing efforts toward two types of applications: equipment to pump, meter, mix and dispense high performance protective coatings and polyurethane foam (protective c! oatings a! nd foam); and equipment to pump, meter, mix and dispense sealants, adhesives, molded polyurethane parts and composites (advanced fluid dispense). It offers sprayer systems and plural component proportioning equipment to apply protective coatings and foam to a wide variety of surfaces. Reactor plural component pumps are used to apply foam to insulate things, such as walls, water heaters, refrigeration, and hot tubs, create commercial roofing membranes and for packaging, architectural design and cavity filling. This equipment is also used to apply two-component polyurea coatings to tanks, pipes, roofs, truck beds and foundations.
Graco�� XM Plural-Component Sprayer series is and XP70 plural component sprayers are used for corrosion-control applications, such as tank and pipeline coatings, shipbuilding, marine and railcar maintenance, wind tower coating, bridge and infrastructure projects and coating structural steel. The XM sprayers provide precise and variable ratio control in a highly configurable system. The XP70 sprayers are fixed ratio units and intended for applications where variable ratio capability is not required. It offers pumps, meters, applicators and valves for the metering, mixing and dispensing of precision beads of sealant and adhesive to bond, mold, seal, vacuum encapsulate, pot, laminate and gasket parts and devices in a variety of industrial applications. The HFR Metering System is an in-plant, hydraulic, fixed-ratio metering system that applies a range of materials used for noise dampening, insulation and structural integrity. It also offers advanced composites equipment, which includes gel coat equipment, chop and wet-out systems, resin transfer molding systems and applicators , which are used for example in the manufacture of vehicles, aircraft, boats, wind turbines and bridge materials.
Contractor Segment
The Contractor segment directs its product development, sales and marketing of three applications: paint, texture, and pavement mainten! ance. The! Contractor segment markets airless paint and texture sprayers (air, gas, hydraulically- and electrically-powered), accessories, such as spray guns, hoses and filters and spare parts, such as tips and seals to professional painters in the construction and maintenance industries, tradesmen and do-it-yourselfers. The products are distributed primarily through distributor outlets whose main products are paint and other coatings. Contractor products are also sold through general equipment distributors. Certain sprayers and accessories are distributed globally through the home center channel.
Contractor equipment encompasses a variety of sprayers, including sprayers that apply markings on roads, parking lots, fields, bike paths, crosswalks and floors; texture to walls and ceilings; highly viscous coatings to roofs; and paint to walls and structures. Many of these sprayers and their accessories contain one or more technological features, such as micro-processor-based controls for consistent spray and protective shut-down, a pump that may be removed and re-installed without tools, an easy-clean feature, gas/electric convertibility, and a durable pump finish. The Company offers a line of professional grade handheld paint sprayers, and in 2011, it introduced a fine finish handheld paint sprayer that sprays lacquers, varnishes, urethanes, sealers, stains and enamels. Contractor equipment also includes pressure washers, and scarifiers that remove markings on roads and other surfaces.
Lubrication Segment
The Lubrication segment focuses its engineering, marketing and sales of two lubrication applications: vehicle services and industrial. The Lubrication segment markets and sells its lubrication equipment worldwide, although the bulk of its sales come from North America. Its lubrication products are sold through independent third party distributors and oil jobbers, and directly to original equipment manufacturers. The Company supplies pumps, hose reels, meters, valves and accessorie! s to the ! motor vehicle lubrication industry. Its customers include fast oil change facilities, service garages, fleet service centers, automobile dealerships and auto parts stores.
In industrial lubrication, the Company offers systems, components, and accessories for the automatic lubrication of industrial and commercial equipment, compressors, turbines, and on- and off-road vehicles. Industries served include gas transmission and petrochemical, pulp and paper, mining and construction, agricultural equipment, food and beverage, material handling, metal manufacturing and wind energy. It offers products that automatically lubricate bearings, gears and generators, and products that evacuate and dispense oil, grease, anti-freeze and hydraulic fluids, from wind power components.
Advisors' Opinion: - [By Seth Jayson]
Graco (NYSE: GGG ) is expected to report Q1 earnings on April 24. Here's what Wall Street wants to see:
The 10-second takeaway
Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Graco's revenues will increase 16.1% and EPS will expand 25.9%.
Top 10 Machinery Stocks To Watch For 2014: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!
Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion: - [By Seth Jayson]
Calling all cash flows
When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on IDEX (NYSE: IEX ) , whose recent revenue and earnings are plotted below.
- [By Rich Duprey]
Diversified technology machinist�IDEX (NYSE: IEX ) announced yesterday its second-quarter dividend of $0.23�per share, the same rate it paid last quarter after raising the payout 15% from $0.20 per share.
- [By Marc Bastow]
This week’s biggest increase came from applied solutions provider Idex (IEX), which �raised its quarterly dividend 22% to 23 cents per share payable April 30 to shareholders of record April 16.
IEX Dividend Yield: 1.60%
- [By Damon Churchwell]
Lastly, a growth company�
The third example of a thriving flow technologies company is IDEX� (NYSE: IEX ) . This one is situated in a unique set of end markets, namely fluid & metering, health & science, and fire & safety/diversified.
Top 10 Machinery Stocks To Watch For 2014: Xylem Inc (XYL)
Xylem Inc. (Xylem), formerly ITT WCO, Inc., incorporated on May 4, 2011, is a provider of equipment and service for water and wastewater applications with a portfolio of products and services addressing the full cycle of water, from collection, distribution and use to the return of water to the environment. It operates in two segments: Water Infrastructure and Applied Water. The Water Infrastructure segment focuses on the transportation, treatment and testing of water, offering a range of products, including water and wastewater pumps, treatment and testing equipment, and controls and systems. Key brands in this segment include Flygt, Wedeco, Godwin Pumps, WTW, Sanitaire, AADI and Leopold. The Applied Water segment encompasses the uses of water and focuses on the residential, commercial, industrial and agricultural markets. The segment�� products include pumps, valves, heat exchangers, controls and dispensing equipment. Key brands in this segment include Goulds Water Technology (Goulds), Bell & Gossett, AC Fire, Standard, Flojet, Lowara, Jabsco and Flowtronex. The Company sells its products in more than 150 countries through a distribution network consisting of its direct sales force and independent channel partners. On October 31, 2011, ITT Corporation completed Spin-off of Xylem, formerly ITT�� water equipment and services businesses. The Spin-off was completed pursuant to the Distribution Agreement, dated as of October 25, 2011, among ITT, Exelis Inc. (Exelis) and Xylem. In July 2012, it acquired MJK Automation A/S. In March 2013, it acquired MultiTrode Pty Ltd.
Water Infrastructure
Water Infrastructure involves the process that collects water from a source and distributes it to users, and then returns the wastewater to the environment. Water Infrastructure serves three applications: transport, treatment and test of water and wastewater for two types of customers: public utilities and industrial facilities. The Transport application includes all of the equipment and s! ervices involved in the movement of water from sources, such as oceans, lakes, rivers and ground water, to treatment facilities, and then to users. It also includes the movement of wastewater from the point of use to a treatment facility and then back into the environment. The Company serves the equipment markets, such as water and wastewater submersible pumps, monitoring controls, and application solutions. With operations on six continents, it also has dewatering rental fleet, serviced with the Company�� Flygt and Godwin brands. In its Water Infrastructure Segment, Transport accounted for approximately 73% of its consolidated revenue during the year ended December 31, 2011. Flygt is the manufacturer of submersible pumps, mixers, and aeration equipment for use in environments, such as water and wastewater treatment, raw water supply, abrasive or contaminated industrial processes, mining and crop irrigation. Flygt products have applications in various markets, including wastewater lift stations, water and wastewater treatment facilities, pressurized sewage systems, oil and gas, steel, mining and leisure markets. Customers include public utility wastewater and clean water treatment facilities, oil and gas platforms, and steel manufacturing companies.
Godwin Pumps is engaged in pump manufacturing. It manufactures, sells, rents and services products that are customized to the specific needs of its clients. Godwin Pumps��products include the fully automatic self-priming Dri-Prime pump, a range of Sub-Prime electric and Heidra hydraulic submersible pumps, Wet-Prime gasoline-powered contractor pumps and a line of generators and portable light towers. Godwin products are primarily used in construction, disaster recovery, flooding, heavy industry, marine use, mining, oil, gas and chemical extraction, refineries, temporary fire protection and water and wastewater transport. Customers include industrial plants, construction contractors, public utility wastewaters and clean water treatment and tr! ansportat! ion facilities, oil, gas and chemical drilling outfits, and refineries. Godwin�� fleet of equipment is rented through 33 United States branches and a global network of distributors. The Treatment application includes equipment and services that treat both water for consumption and wastewater to be returned to the environment. Leopold is the Company�� filtration brand. Disinfection systems, both ultraviolet (UV) and ozone oxidation, treat both public utility drinking water and wastewater, as well as industrial process water, and are provided through its WEDECO brand. Biological treatment systems are key to the treatment of solids in wastewater plants, which is provided through its Sanitaire brand. In its Water Infrastructure Segment, Treatment accounted for approximately 18% of its consolidated net sales in 2011.
The Company�� Sanitaire brand provides biological wastewater treatment solutions for public utility and industrial applications. Sanitaire�� offering includes diffused aeration, sequencing batch reactors, drum filters and state-of-the-art controls. Sanitaire is a brand in diffused aeration, which is a process that introduces air into a liquid, providing an aerobic environment for degradation of organic matter. Principal Sanitaire customers are public utility and industrial wastewater treatment facilities. WEDECO develops chemical-free and environmentally friendly water treatment technologies, including ultraviolet light and ozone systems. There are over 250,000 installed WEDECO systems for UV disinfection and ozone oxidation globally in private, public utility and industrial locations. Customers include public utility wastewater and clean water treatment facilities, power plants, pulp and paper mills, food products manufacturers and aquaculture facilities. Leopold is a gravity media filtration and clarification solutions for the water and wastewater industry. Nova Analytics, its served market is focused on water and the environment for quality levels throughout the water in! frastruct! ure loop.. Analytical systems are applied in three primary ways: in the field, in a facility laboratory, or real time, online monitoring in a treatment facility process. In its Water Infrastructure Segment, Test accounted for approximately 9% of its consolidated net sales in 2011.
In wastewater treatment facilities, WTW-branded systems monitor parameters, such as dissolved oxygen, pH, and turbidity throughout the water process. WTW�� product offering includes meters, sensors, data-loggers, photometers and software. Aanderaa Data Instruments AS (AADI) offers sensors, instruments and systems for measuring and monitoring in environments, such as rivers, oceans and the polar regions through networked systems using wireless technology that monitors temperature, salinity, oxygen, turbidity, current and waves for ecosystem health. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction. Oceanography International Corporation (OI Analytical) provides products used for chemical analysis. The Company develops, manufactures, sells, and services analytical instruments that detect, measure, analyze, and monitor chemicals in liquids, solids, and gases. Yellow Springs Instrument Company (YSI) develops and manufactures sensors, instruments, software and data collection platforms for environmental and coastal water quality monitoring and testing. YSI also offers life sciences products, including biochemical analyzers for bioprocess monitoring, food and beverage processing, and sports physiology. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction.
Applied Water
Applied Water encompasses all the uses of water. Its served market consists of the main uses of global water: Building Services, Industrial Water and Irrigation. The Building Services is defined by four main uses of water in building services ! applicatio! ns, such as in residential homes and commercial buildings, including offices, hotels, restaurants and malls. The first is the supply of potable water for consumption, such as for drinking and hygiene. The Goulds brand offers pumps and boosting systems utilized within buildings, sourcing water from distribution networks or from wells. The second application is wastewater removal with sump and sewage pumps. The third application is in heating, ventilation and air conditioning (HVAC), where Bell & Gossett specializes in pumps and valves that are used in water-based heating and cooling systems. The fourth water-related building service area is fire protection, where its AC Fire brand supplies full pump systems for emergency fire suppression. In Europe, Lowara is a brand in the commercial and residential water market with applications in the four main uses of water. In its Applied Water Segment, Building Services accounted for approximately 51% of its consolidated net sales in 2011.
The Company�� Goulds brand supplies vertical multistage pumps to boost pressure for purposes , such as circulating water through a manufacturing facility to cool machine tools. Its Lowara brand focuses on water treatment, industrial washing equipment and machine tool cooling. The Standard brand delivers heat exchangers for combined heat and power (CHP) applications within power generation plants. It also provides applications, such as flexible impeller pumps for wine processing facilities served by its Jabsco brand, and water-based detergent dispensing and water circulation within car washes served by Flojet and Goulds air-operated diaphragm and end suction pumps. In its Applied Water Segment, Industrial Water accounted for approximately 42% of its consolidated net sales in 2011. The irrigation business consists of irrigation-related equipment and services associated with bringing water from a source to the plant or livestock need, including hoses, sprinklers, center pivot and drip irrigation. The Company focuses ! on the pu! mps and boosting systems that supply this ancillary equipment with water. Its Goulds brand brings mixed flow pumps, and its Flowtronex group specializes in equipment solutions, such as the Hydrovar boosting system, which incorporates monitoring and controls. Its Lowara brand also produces pumps for agriculture applications and irrigation of gardens and parks. In its Applied Water Segment, Irrigation accounted for approximately 7% of the Company�� consolidated net sales in 2011.
Advisors' Opinion: - [By Holly LaFon]
Xylem Inc. (0.7%) (XYL)(XYL - $36.42 - NYSE) is a global leader in the design, manufacturing, and application of highly engineered technologies for the transportation, treatment, and testing of water. The company is expected to benefit from favorable long term fundamentals in the water industry, driven by scarcity, population growth, aging of the infrastructure, and the need to improve water quality. Further, with a large installed base of pumps and systems, the company is well positioned to increase aftermarket revenue, which currently represents roughly 40% of total revenues. Xylem's attractive business mix also generates strong cash flow, which is expected to support acquisitions, debt service, and dividend growth. Concerns regarding weakness in Europe and municipal spending levels in the U.S. remain, although we believe the long term fundamentals outweigh these concerns. From Mario Gabelli (Trades, Portfolio)'s Gabelli Asset Fund's first quarter 2014 shareholder commentary.Also check out: Mario Gabelli Undervalued Stocks Mario Gabelli Top Growth Companies Mario Gabelli High Yield stocks, and Stocks that Mario Gabelli keeps buying Currently 0.00/512345
Rating: 0.0/5 (0 votes)
- [By Lauren Pollock]
After giving a downbeat revenue forecast three months ago, Xylem Inc.'s(XYL) results weren’t nearly as bad as feared. But the water firm during the summer saw a “strong performance in emerging markets and better-than-expected activity in Europe.” The cherry on top is Xylem undoing some of July’s cut to 2013 estimates. Shares surged 11% to $32.20 premarket.
- [By Jim Jubak]
I wouldn't exactly call it super enthusiastic guidance, but this quarter, when so few companies have anything good to say about their business for the fourth quarter, even Xylem's (XYL) tepid enthusiasm stands out.
- [By Ben Levisohn]
Xylem (XYL) makes products for water collection and distribution. Xymox was a goth band from the Netherlands. What do they have in common, besides an X and a y at the beginning of their names? They demonstrate that anyone can be underestimated.
Jeff Thomas For Xymox, that came when their song “Imagination” off their third album hit the Billboard Hot 100. For Xylem, it might just be today, as its shares have jumped 13% to $32.45 following its surprisingly good earnings. Bloomberg�has the details:
Xylem�� third-quarter earnings per share of 49 cents, excluding some items, topped the 35-cent estimate…Xylem raised its 2013 adjusted earnings per share forecast to $1.60 to $1.65 from $1.40 to $1.50. Analysts projected $1.37 on average.
Wedbush’s David Rose calls noted Xylem’s “impressive margin recovery.” He writes:
Operating margins before charges were 13.5% vs. 12.9% in the year-ago period and 380 bps above our estimate. Following a disappointing Q2 with substantially lowered guidance, XYL managed to see an impressive reversal in margin trends for its Water Infrastructure business, which experienced 15.5% adjusted operating margins versus our estimate for 11.8%. Margins for Applied Water were down YOY and below our estimate. Adjusted operating margins exclude special charges and realignment costs.
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
Top 10 Machinery Stocks To Watch For 2014: Emak SpA (EM)
Emak SpA is an Italy-based company primarily engaged in the manufacture of outdoor power equipment for gardening, forestry, agriculture and industry. The Company�� portfolio includes chainsaws, brush cutters, lawnmowers, garden tractors, water pumps, high pressure washers, transporters, rotary cultivators, motor hoes and power cutters, among others. It also manufactures spare parts, accessories and protective clothing. The Company sells its products under various brand names, such as Oleo-Mac, Efco, Bertolini, Nibbi and Staub. Emak SpA directly manages distribution in the Italian market and it sells products, through its commercial subsidiaries, in France, Germany, the United Kingdom, Spain, the countries of Benelux, Poland, Ukraine, among others.The Company is controlled by Yama SpA, which is an industrial holding company.
Advisors' Opinion: - [By Holly LaFon]
As true value investors, Brandes oft en moves against the crowd amid markets' constantly changing performance cycles. Take the recent equity market weakness in a number of emerging market (EM) countries for example. Over the last year, while macroeconomic and geopolitical concerns cast a cloud of uncertainty over the asset class in general, we started to see some interesting investment opportunities at the company level as a result of such market weakness.
Top 10 Machinery Stocks To Watch For 2014: Austin Engineering Ltd (ANG)
Austin Engineering Limited is engaged in the manufacture, repair, overhaul and supply of mining attachment products, general steelwork structures and other associated products and services for the industrial and resources-related business sectors. The Company operates in four segments: Australia, which includes mining equipment, other products and repair and maintenance services; Americas, which includes mining equipment and other products, consisting of North America and South America; Asia, which includes Indonesia for mining equipment and other products, and the Middle East, which includes aluminum smelter equipment and products. In October 2013, Austin Engineering Limited completed the acquisition of the business of Servigrut.
Advisors' Opinion:
